Bondix Intelligence enables bonding functionality in Teltonika Networks routers!（日本語）
2021年11月25日木曜日 9:00:00 UTC
This webinar is for anyone who wishes to:
- find out more about bonding functionality;
- learn how to use it;
- understand all benefits and
- hear real-life examples and configuration scenarios.
- Do not miss a chance to get all the answers to your questions from our Andrius Unikas & Martin Santner representing Teltonika Networks and Bondix Intelligence.
登壇者
Q＆A
When using the RUTX11 we can combine 2 LTE carriers. Can we add 1 additional LTE carrier with an RUTX router connected to the RUTX11 WAN port? Use case = 3 LTE carriers（日本語）
With the RUTX11 you can only use 1 carrier at a time but you can use 2 SIM cards. If you connect another RUTX11 to the first one you will be able to use 2 carriers at the same time. If have a RUX12 and add an RUX11 you can utilize 3 carriers
「RUTX11」では2つのLTEキャリアを組み合わせて使用できますが、「RUTX11」のWANポートに別の「RUTX」シリーズのルーターを接続することで、さらにもうひとつLTEキャリアを追加することは可能でしょうか？
（想定ユースケース：LTEキャリア3回線）
「RUTX11」では、同時に使用できるキャリアは1つのみですが、2枚のSIMカードを利用することができます。別の「RUTX11」を1台目に接続すれば、同時に2つのキャリアを使用することが可能です。さらに、「RUTX12」に「RUTX11」を追加すれば、3つのキャリアを活用することができます。
SANE と SDWAN の違いは何ですか?
S.A.NE
When sending application traffic using Teltonika Router with Bondix, does it send packet on all available internet uplinks? or it only send 1 uplink at a time?（日本語）
You can activate this feature on the router by switching to \"paket dublication\" mode. If this is activated, packages will be copied and send over all available links at the same time, the server will allways accept the first one arriving. This comes at a cost, since you are increasing the needed bandwidth for each application.
ロードバランシングを使用しない場合、1台のル ーターで利用可能な複数のWAN回線は、どのようにインターネット通信に使用されるのでしょうか？
S.A.NEは、利用可能なすべてのWANリンクを仮想的な単一回線に集約することで、各アプリケーションが利用可能なすべてのWANリンクの速度を最大限活用できるようにします。少なくとも1つのリンクがアクティブで利用可能である限り、接続が中断されることはありません。
Will the RUTOS stay compatible with the SANE Client? Or do we need to upgrade the SANE Client when there is a RUTOS update?（日本語）
Yes, we are working with the Teltonika Dev team to ensure that S.A.NE is always compatible with the RUT OS. If there is an upgrade of the RUT OS, S.A.NE will either continue working or you will receive an update from Bondix. Of course, all your settings stay persitent when you upgrade the S.A.NE client
Does it combine the internet bandwidth at the LAN when you are to conduct a browser speed test?（日本語）
Yes, that is the advantage of Bonding. The combined speed of all links are available for a single application like a browser speedtest
This feature is already available in latest RUT955 firmware? How is thie feature enabled? The S.A.NE License is only necessary if using the VPN Server and a VPN server is not mandatory?（日本語）
The currently supported firmware for RUT95X is 06.08.5, it is installed by using the integrated package manager. VPN is optional, a SANE license and server is always necessary.
is there a limit to the bandwidth capacity to bonding? for example can I bond 5 100mbps links to geth 500mbps（日本語）
On the rutx 12 the max troughput we can achive is around 200 Mbit/s. Bonding 5 ETH links is not the typical use case scenario for the RUTX. The limitation is coaused by the available amount of RAM for S.A.NE. Example: to cache at least 1 sec of incomnt and outgoing bonded traffic, you will need around 40 MB of RAM available.
「RUT95x」および「RUTX」シリーズのルーターで、ボンディング使用時に達成可能な最大スループットはどの程度ですか？
「RUTX12」では、ボンディング接続時の合計最大速度は、各WAN回線の特性により約150～200 Mbit/sとなります。なお、衛星回線のように遅延が非常に大きい回線を使用する場合は、性能に影響が出る点にご注意ください。「RUT950」および「RUT955」では、回線特性にもよりますが、合計で約50～80 Mbit/sの範囲となっています。
Will the streaming example benefit of multiple wan links with upstream bandwidth for a single stream and will the stream have the packets arriving in order on the receiving side?（日本語）
Yes, especially streaming is a perfect use case for bonding. let´s say your stream requires 10 Mbit/s upstream and your 3 links have 5,3 and 5 Mbit/s each, Bondix S.A.NE will give you the combined bandwidth of all links to send your stream in the best possible quality. The Server will handle the package reordering automatically
does it bring any latency in transmission?（日本語）
Yes, as I said nothing is for free in life :) We se a typical latancy increase between 8 to 15 ms depending on the quality of the server hoster.
will the latency of the bonded bandwidth be affected by one high latency link among the other low latency links?（日本語）
Yes and no. In gerneral S.A.NE will try to keep the lantency as low as possible but in gerneral the bandwidth delay product will apply sonner or later
can we use this solution between RF data modem with Mobile network?（日本語）
S.A.NE will work with every kind of WAN link as long the server can be reached over that link.
Does it bring additional cost?（日本語）
Yes, you will need to buy either a S.A.NE Essentials or S.A.NE Enterprise license to use it on the Teltonika router. The license always includes the server image so you can setup your own server relay or you can get this service via one of our resellers or distributors
Is it possible to connect to a Cisco Mobile-IP system?（日本語）
If you mean to use Cisco Ipsec throught the Bondix tunnel, the answer is \"Yes\". On the other hand, S.A.NE is frequently used to replace Cisco Mobile IP since it reacts much faster on connection interuptions and is also able to aggregate the bandwidth
Are we able to see a live demonstration for the “optimise latency” setting?（日本語）
Yes, please touch base with us via sales@bondixintelligence.com and we will make an appointment. You can also test this yourself if you have a RUTX12 router available with one of our demo servers
What is the behaviour of traffic if you do trace route to google 8.8.8.8 when bondix is enabled to the internet uplinks?（日本語）
You will have an additional hop which will be S.A.NE concentrator/server/relay, Everthing else stays the same as before
お客様は、固定回線トンネルやモ バイルネットワーク（APN）によるプライベートネットワークを利用しており、インターネット接続はありません。この場合、オンプレミス型ソリューションとして導入することは可能でしょうか？
Is the transmission in the tunnel encrypted?（日本語）
No. While the protocol utilizes SSL encryption for its handshake and the transport of meta information, user traffic remains unencrypted
Is the Bondix Server also a Teltonika Router? or this is a VM-based instance of Bondix?（日本語）
It´s a VM which you can fire up at any cloud hoster. We recommend ubuntu because it offers the easiest install but you can install the serve on any linux based machine or VM
Will default route go over the bondix tunnel, or can you set the routes that will used for the tunnel traffic/server and other traffic would egress out locally?（日本語）
The server pushes routes (default route in most cases) to the client, which can be freely configured
Do you I have to connect to Bondix server for the Sane app to work?（日本語）
Yes, you need to connect to S.A.NE server if you want to use the bonding. But you can always disable S.A.NE on the router view the interface. If S.A.NE is disabled on the router, it will be act as a standrd Teltonika router
How much the CPU percentage on the router is required when Bondix is running?（日本語）
This naturally depends on current usage. Bonding capacity is limited by CPU. General load when mostly idle is however <1%
The S.A.NE server is Linux based?（日本語）
Yes it is Linux based.
For the marine use case, what's the farthest distance an RUTX/RUT can be from a base station/POP?（日本語）
This all depends on the antennas you are using and is not related to the router. It also makes a big difference if you are allowed to use a signal amplifier.
「RUTX14」の概要では、LTEを2回線搭載していますか？
RUTX 14 にはデュアル SIM がありますが、モデムは 1 つだけです。
Do you have partners in the Philippines?（日本語）
Yes we are happy to bring you in touch, just contact us under sales@bondixintelligence.com or via our website
Does it split TCP connections over different WAN connections?（日本語）
Yes.
Could be the server installed on premise?（日本語）
Yes.
The client and server SW based? Switch over time in server redundancy?（日本語）
Yes, switchover time in server redundancy is currently ~15 seconds.
Can you use SANE together with zero trust networks, say Net Foundry?（日本語）
We never tried it until now. If you want to start testing yourself, contact us via sales@bondixintelligence.com or via our website www.bondixintelligence.com
CAN RMS RUN ON A ON-SITE SERVER（日本語）
Please contact Teiltonika directly if you have any RMS realted questions
When using the RUTX11 we can combine 2 LTE carriers. Can we add 1 additional LTE carrier with an RUTX router connected to the RUTX11 WAN port? Use case = 3 LTE carriers（日本語）
Yes.
Load balancing need to be configured in RUTX product, correct ?（日本語）
Yes, everything can be configred on the router but also pushed via the server side to each router
Is the bonding solution using an industry standard for aggregation?（日本語）
No. There is no \"industry standard\" in regards of bonding. Compared to other solutions on the market, S.A.NE does not need a VPN for the bonding so you can use any industrial standard VPN supported by the Teltonika router to secure the connection if needed.
